Partial rotation

Sort condition
Newest first
Oldest first
Large number of views

Show 1 to 24 of 24

  1. Product image of TOK rotary damper SR3 TypeA(CW)
    • Horizontal usePartial rotationMetal materialScrew fixingTorque adjustmentLong lifeMax opening angle 120°
    • 0.51 to 1.00 N･m
    • Others

    Automatic torque adjustment | SR3

    Features‐ Automatic torque adjustment (Applicable to 1 N･m or smaller)‐ Small variation in closing time‐ Durable for …
  2. Product image of TOK rotary damper TD22 TypaA(CW)
    • Horizontal usePartial rotationMetal materialLong lifeCold resistanceMax opening angle 110°
    • 2.01 to 3.00 N･m3.01 to 4.00 N･m
    • Outer diameter 16 to 18 mm

    Slim design with long mounting shaft |…

    Features‐ Slim design with long mounting shaft‐ Outer diameter of Ø 16.2 mm‐ High torque (Up to 4 N･m)‐ Durable for 1…
    • Horizontal usePartial rotationPlastic materialHingeScrew fixingTorque adjustmentLong lifeMax opening angle 110°
    • 0.11 to 0.50 N･m0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 21 to 25 mm

    Equipped with torque adjustment functi…

    Features‐ Equipped with torque adjustment function‐ A dedicated bracket enables the use of this product as a rotary d…
  4. Product image of TOK rotary damper TD38 TypeA(CW)
    • Vertical usePartial rotationScrew fixingLong lifeHeat resistanceCold resistanceMax opening angle 180°
    • 0.11 to 0.50 N･m0.51 to 1.00 N･m
    • Outer diameter 21 to 25 mm

    Large opening angle | TD38

    Features‐ Long-selling vertical use type rotary dampers‐ Allowable opening angle of 180°‐ Durable for 300,000 cycles‐…
  5. Product image of TOK rotary damper TD42 TypeA(CW)
    • Horizontal usePartial rotationMetal materialScrew fixingMax opening angle 120°Superior responsiveness
    • 4.01 to 5.00 N･m5.01 N･m or more
    • Outer diameter 40 mm or more

    Especially high torque damper | TD42

    Features‐ High rigidity achieved by the use of zinc alloy‐ Higher torque with horizontal use dampers (Up to 8.8 N･m)‐…
  6. Product image of TOK rotary damper TD54 TypeA(CW)
    • Horizontal usePartial rotationPlastic materialChemical resistanceMax opening angle 110°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 19 to 20 mm

    Chemical resistant | TD54

    Features‐ Made with chemical-resistant PBT plastic is used‐ 100% plastic version of TD133Product lineupProduct nameTo…
  7. Product image of TOK rotary damper TD56 TypeA(CW)
    • Horizontal usePartial rotationMetal materialMax opening angle 110°Superior responsiveness
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m2.01 to 3.00 N･m
    • Outer diameter 16 to 18 mm

    Superior damping responsiveness | TD56…

    Features‐ High rigidity achieved by the use of zinc alloy‐ Superior damping responsiveness‐ The thin shaft‐Using the …
  8. Product image of TOK rotary damper TD60 TypeA(CW)
    • Horizontal usePartial rotationMetal materialScrew fixingMax opening angle 110°Superior responsiveness
    • 0.11 to 0.50 N･m0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Others

    The thinnest products | TD60

    Features‐ The thinnest products for horizontal use‐ Space-saving design‐ High rigidity achieved by the use of zinc al…
  9. Product image of TOK rotary damper TD69 TypeA(CW)
    • Horizontal usePartial rotationPlastic materialChemical resistanceHeat resistanceCold resistanceMax opening angle 110°
    • 1.01 to 2.00 N･m2.01 to 3.00 N･m3.01 to 4.00 N･m
    • Outer diameter 19 to 20 mm

    Wide temperature range for operation |…

    Features‐ Made with super engineering plastic (PEI)‐ Wide temperature range for operation (-5°C to 80°C)‐ Made with c…
    • Horizontal usePartial rotationPlastic materialLong lifeMax opening angle 110°Small size
    • 0.002 to 0.10 N･m0.11 to 0.50 N･m
    • Outer diameter 11 to 15 mm

    Can be inserted in either direction | …

    Features‐ The smallest horizontal use damper(Ø 11 mm)‐ The form of the TD73 is symmetrical,so it can be inserted in e…
  11. Product image of TOK rotary damper TD75 TypeA(CW)
    • Vertical usePartial rotationLong lifeMax opening angle 180°Small size
    • 0.002 to 0.10 N･m0.11 to 0.50 N･m
    • Outer diameter 11 to 15 mm

    Wide opening angle | TD75

    Features‐ The smallest vertical use damper (Ø 11 mm)‐ Allowable opening angle of 180°‐ Durable for 100,000 cyclesProd…
  12. Product image of TOK rotary damper TD89
    • Horizontal usePartial rotationMetal materialHingeScrew fixingMax opening angle 120°
    • 4.01 to 5.00 N･m5.01 N･m or more
    • Outer diameter 26 to 30 mm

    Hinge type damper | TD89

    Features‐ TD89 generates a torque of 10 N･m, which is the largest among our products‐ The hinge type design facilitat…
  13. Product image of TOK rotary damper TD90
    • Horizontal usePartial rotationPlastic materialScrew fixingMax opening angle 120°
    • 3.01 to 4.00 N･m4.01 to 5.00 N･m
    • Others

    Can be additionally attached to the pi…

    Features‐ This product has been developed for additional mounting on piano key lids without damping function‐ Removin…
  14. Product image of TOK rotary damper TD99A1 TYpeA(CW)
    • Horizontal usePartial rotationPlastic materialChemical resistanceMax opening angle 110°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 16 to 18 mm

    Most popular damper design | TD99 (Hor…

    Features‐ Made with chemical-resistant PBT plastic is used‐ Best-selling products‐ The most popular damper design‐ TD…
    • Horizontal usePartial rotationMetal materialMax opening angle 280°Superior responsiveness
    • 0.002 to 0.10 N･m
    • Outer diameter 16 to 18 mm

    Larger opening angle (280 degrees) | T…

    Features– Anti-rust type with chromate treatment is also available（CM-Type）‐ Larger opening angle (280 degree…
    • Horizontal usePartial rotationPlastic materialChemical resistanceMax opening angle 290°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 16 to 18 mm

    Larger opening angle (290 degrees) | T…

    Features‐ Made with chemical-resistant PBT plastic is used‐ Larger opening angle (290 degrees)‐ The most popular damp…
  17. Product image of TOK rotary damper TD99A6 TypeA(CW)
    • Vertical usePartial rotationPlastic materialChemical resistanceMax opening angle 110°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 16 to 18 mm

    Most popular damper design | TD99 (Ver…

    Features‐ The most popular damper design‐ Vertical use version of TD99‐ TD99 series is identifiable by the shaft colo…
  18. Product image of TOK rotary damper TD99A7 TypeA(CW)
    • Horizontal & Vertical usePartial rotationPlastic materialChemical resistanceMax opening angle 110°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m
    • Outer diameter 16 to 18 mm

    Most popular damper design | TD99 (Hor…

    Features‐ Made with chemical-resistant PBT plastic is used‐ Capable of achieving high torque at all opening angles‐ T…
  19. Product image of TOK rotary damper TD100 TypeA(CW)
    • Horizontal usePartial rotationMax opening angle 110°
    • 0.51 to 1.00 N･m1.01 to 2.00 N･m2.01 to 3.00 N･m
    • Outer diameter 16 to 18 mm

    High torque with Ø 16 mm O.D. | TD100

    Features‐High torque with Ø 16 mm damper (Up to 3 N·m)‐High rigidity achieved by the use of zinc alloy for the shaft‐…
  20. Product image of TOK rotary damper TD112 TypeA(CW)
    • Horizontal usePartial rotationMetal materialMax opening angle 110°
    • 1.01 to 2.00 N･m2.01 to 3.00 N･m
    • Outer diameter 16 to 18 mm

    Shaft is thinner | TD112

    Features‐ Compact design made with zinc alloy‐ Shaft is thinner than that of plastic rotary dampers‐ High rigidity ac…
  21. Product image of TOK rotary damper TD118 TypeA(CW)
    • Horizontal usePartial rotationPlastic materialMax opening angle 110°
    • 1.01 to 2.00 N･m2.01 to 3.00 N･m3.01 to 4.00 N･m
    • Outer diameter 19 to 20 mm

    High torque with plastic products | TD…

    Features‐ The products with the highest torque (3.5 N･m) among our plastic rotary dampers‐ Outer diameter of Ø 19 mmP…
  22. Product image of TOK rotary damper TD129 TypeA(CW)
    • Horizontal usePartial rotationMetal materialMax opening angle 110°
    • 3.01 to 4.00 N･m
    • Outer diameter 16 to 18 mm

    Highest torque at Ø16mm O.D. | TD129

    Features‐ Highest torque with Ø 16 mm damper (Up to 4 N･m)‐ High rigidity achieved by the use of zinc alloyProduct li…
  23. Product image of TOK rotary damper TD133 TypeA(CW)
    • Horizontal usePartial rotationMax opening angle 110°
    • 2.01 to 3.00 N･m
    • Outer diameter 19 to 20 mm

    Zinc alloy shaft | TD133

    Features‐ Replaceable design with TD69‐ Zinc alloy is applied for the shaft‐ High torque with Ø 20 mm damper (Up to 3…
    • Horizontal & Vertical usePartial rotationPlastic materialLong lifeMax opening angle 110°Small size
    • 0.002 to 0.10 N･m0.11 to 0.50 N･m
    • Outer diameter 11 to 15 mm

    Can be inserted in either direction | …

    Features‐ The form of the TD148 is symmetrical, so it can be inserted in either direction‐ The smallest partial rotat…

Show 1 to 24 of 24