Overview of rotary dampers

Product image of TOK rotary damper TD75 TypeA(CW)
  • Vertical use
  • 0.002 to 0.10 N･m
  • Outer diameter 11 to 15 mm

Wide opening angle | TD75

FeaturesThe smallest vertical use damper (Ø 11 mm)Allowable opening angle of 180°Durable for 100,000 cyclesProduct lineupProduct nameTorque (lbf⋅i…

Read more
Product image of TOK rotary damper TD89
  • Horizontal use
  • 4.01 to 5.00 N･m
  • Outer diameter 26 to 30 mm

Hinge type damper | TD89

FeaturesTD89 generates a torque of 10 N･m, which is the largest among our productsThe hinge type design facilitates easy mountingIts exterior is ma…

Read more
Product image of TOK rotary damper TD90
  • Horizontal use
  • 3.01 to 4.00 N･m
  • Others

Can be additionally attached to …

FeaturesThis product has been developed for additional mounting on piano key lids without damping functionRemoving the load returns the arm to its …

Read more
Product image of TOK rotary damper TD99A1 TYpeA(CW)
  • Horizontal use
  • 0.51 to 1.00 N･m
  • Outer diameter 16 to 18 mm

Most popular damper design | TD9…

FeaturesMade with chemical-resistant PBT plastic is usedBest-selling productsThe most popular damper designTD99 series is identifiable by the shaft…

Read more
  • Horizontal use
  • 0.002 to 0.10 N･m
  • Outer diameter 16 to 18 mm

Larger opening angle (280 degree…

FeaturesAnti-rust type with chromate treatment is also available（CM-Type）Larger opening angle (280 degrees)The most popular damper designUsing th…

Read more
  • Horizontal use
  • 0.51 to 1.00 N･m
  • Outer diameter 16 to 18 mm

Larger opening angle (290 degree…

FeaturesMade with chemical-resistant PBT plastic is usedLarger opening angle (290 degrees)The most popular damper design0.5 N・m can be made as pro…

Read more
Product image of TOK rotary damper TD99A6 TypeA(CW)
  • Vertical use
  • 0.51 to 1.00 N･m
  • Outer diameter 16 to 18 mm

Most popular damper design | TD9…

FeaturesThe most popular damper designVertical use version of TD99TD99 series is identifiable by the shaft colorProduct lineupProduct nameTorque (…

Read more
Product image of TOK rotary damper TD99A7 TypeA(CW)
  • Horizontal & Vertical use
  • 0.51 to 1.00 N･m
  • Outer diameter 16 to 18 mm

Most popular damper design | TD9…

FeaturesMade with chemical-resistant PBT plastic is usedCapable of achieving high torque at all opening anglesTD99 series is identifiable by the sh…

Read more
Product image of TOK rotary damper TD100 TypeA(CW)
  • Horizontal use
  • 0.51 to 1.00 N･m
  • Outer diameter 16 to 18 mm

High torque with Ø 16 mm O.D. | …

FeaturesHigh torque with Ø 16 mm damper (Up to 3 N·m)High rigidity achieved by the use of zinc alloy for the shaftAdding an option, quick release s…

Read more
Product image of TOK rotary damper TD112 TypeA(CW)
  • Horizontal use
  • 1.01 to 2.00 N･m
  • Outer diameter 16 to 18 mm

Shaft is thinner | TD112

FeaturesCompact design made with zinc alloyShaft is thinner than that of plastic rotary dampersHigh rigidity achieved by the use of zinc alloyHigh …

Read more
Product image of TOK rotary damper TD118 TypeA(CW)
  • Horizontal use
  • 1.01 to 2.00 N･m
  • Outer diameter 19 to 20 mm

High torque with plastic product…

FeaturesThe products with the highest torque (3.5 N･m) among our plastic rotary dampersOuter diameter of Ø 19 mmProduct lineupProduct nameTorque (…

Read more
Product image of TOK rotary damper TD129 TypeA(CW)
  • Horizontal use
  • 3.01 to 4.00 N･m
  • Outer diameter 16 to 18 mm

Highest torque at Ø16mm O.D. | T…

FeaturesHighest torque with Ø 16 mm damper (Up to 4 N･m)High rigidity achieved by the use of zinc alloyProduct lineupProduct nameTorque (lbf⋅in)Da…

Read more